HARLEY DAVIDSON TOURING LOW PROFILE REAR SUSPENSION KIT INSTALLATION...
download INSTALLATION 1. Refer to the Service Manual and follow the instructions given to remove the seat. Perform this installation when the engine is cool. Working on or near the exhaust system when...
View ArticleHarley Davidson 1990 and later HSR Choke Cable Installation Manual
download The majority of HSR42/45 installations use the Harley cable. Installation is simple when the installation instructions are followed, step by step. Those steps are: • Remove the stock Harley...
View Article2002-2003 Harley Davidson EFI Touring Models Power Commander Installation MANUAL
download Your Power Commander has been programmed with a base map for your application. You can adjust the base map or install an alternate map using your Computer. Please refer to the supplied CD-Rom...
View Article1995-2010 HARLEY DAVIDSON TOURING MODELS 3.5"& 4" TRU-POWER CHROME SLIP-ON...
download 1. Be sure motorcycle is properly secured before you begin. 2. Remove saddlebags and place aside. 3. Begin removing your stock mufflers. Starting on one side of the bike, loosen the clamp...
View ArticleHARLEY DAVIDSON SECURITY SYSTEM KITS INSTALLATION INSTRUCTIONS
download FL Touring models equipped with a TLE/ TLE Ultra Sidecar will require the additional installation of a Bank Angle Switch Kit (88115-03) and is available for separate purchase. See a...
View Article2010 Harley Davidson Touring Model Power Commander Installation manual
download 1 Remove the stock seat. 2 Unplug the stock wiring harness from the ECM (Fig. A) . 3 Plug the PCV connectors in-line of the stock ECM and wiring harness (Fig.B). 4 Tuck the PCV to wiring...
View ArticleHARLEY DAVIDSON TOURING PILLION KIT INSTALLATION MANUAL
download INSTALLATION 1. Remove stock pillion from motorcycle according to applicable Service Manual instructions. 2. For FLSTN models: Remove the rear mounting bracket from the stock pillion, and save...
View ArticleTriumph Bonneville America And Speedmaster The Freak Installation...
download INSTALLATION In order to install The Freak, the factory air-box must be removed. Because of it’s design, the factory air-box is not an item that is easily removed. There are several parts that...
View ArticleHarley-Davidson The WHEELDOCK EZ-UP Center Stand Installation MANUAL
download Unlike other center stands, the WHEELDOCK EZ UP stand requires very little effort to operate and can usually be done while still on the bike by simply pushing down on the foot lever with your...
View ArticleHarley-Davidson touring bikes WHEELDOCK EZ-UP Center Stand Installation...
download Unlike other center stands, the WHEELDOCK EZ UP stand requires very little effort to operate and can usually be done while still on the bike by simply pushing down on the foot lever with your...
View Article
